
Evoline Liner
These manufacturers know that diversification is the key to global success and now, EVOLiNE continues to evolve as they supply the world’s finest quality felt and fiberglass reinforced CIPP liners for gravity sewer, pressure pipe and potable water applications.
With manufacturing supply partners having locations throughout Europe and the United States, with more than 70 million metres of successful installations around the globe, the quality of EVOLiNE liners has been resoundingly confirmed. Their personalised care and close attention to the smallest of details ensures EVOLiNE customers grow right along with them.
EVOLiNE inversion and pull-in place liners are manufactured to meet the highest standards and maximise ease of use. When installed with EVOLiNE resins they conform to Watermark testing standards and are sold under No-Dig Depot’s watermark certificate number 23325.
- EVOflex 4mm inversion liner
- Available in DN100 and DN150.
- This liner is suited to 1D inversion installations and has the capability to invert around multiple 90° bends with ease.
- EVOflex Plus 6mm 3D liner
- Available in
- DN70-100
- DN90-125
- DN100-150
- DN150-225
- This liner is suited to 1D and 3D inversion and pull-in-place installations, and with the flexible 6mm design is easy to install while maintaining strength when expanded to the maximum diameter.
- Available in
- EVOflex 3.5mm 1D inversion liner
- Available in DN50 to DN150.
- This liner is suited to inversion installations where the host pipe maintains structural integrity, and is also suited to above ground installations.
- The 3.5mm thickness allows for easy inversion through tight bends, and fast junction re-instatement.
- EVOflex 3.5mm 3D inversion liner
- Available in
- DN30-50
- DN45-70
- DN60-90
- DN63-100
- DN70-100
- DN90-125
- DN100-150
- This liner is suited to 3D inversion installations where the host pipe maintains structural integrity, and is also suited to above ground installations.
- The 3.5mm thickness allows for easy inversion through tight bends, and fast junction re-instatement.
- Available in
- EVOLiNE 4.5mm S-Liner
- Available in
- DN100
- DN150
- DN225
- S-Liner is the most suited liner for pull-in-place installations and can negotiate up to back-to-back 90° bends.
- S-Liner is also suitable for relining DN150 boundary traps and around DN150 square junctions using the PIP Packer system.
- S-Liner can also be used for inversion installations with bends up to 90°.
- Available in
Coming Soon…
